Condensate Pump Not Working? Safe Checks Before You Replace It

Condensate Pump Not Working? Safe Checks Before You Replace It

A condensate pump moves water from an HVAC drain pan to a higher drain point. If it stops, the reservoir can fill, water can leak, or an overflow safety may stop cooling. Do not bypass that safety.

Safe checks

Turn the system off if water is spilling. Look for an obviously kinked discharge tube, displaced reservoir, or water near the pump. Note the model and any status light pattern. Do not remove electrical covers, probe wires, or pour chemicals into the reservoir. Only unplug equipment if the plug is accessible and the area is dry.

A stuck float, debris, blocked tube, failed motor, or tripped safety can all cause a pump to stop. A technician can isolate power, inspect the drainage route, test the float and safety circuit, and determine whether the pump needs replacement. Never jumper the overflow switch.

See DiversiTech condensate management resources and its safety-switch testing document.

Video: pump troubleshooting

“Condensate Pump Replacement & Troubleshooting,” by Repair and Replace on YouTube. Original video.

Image credit: Kettenreaktion, original Unsplash page. Licensed under the Unsplash License.

Back to blog