Home thermostat used to control a heat pump

Heat Pump Auxiliary Heat: When AUX Is Normal and When to Call for Service

Seeing “AUX” on a heat-pump thermostat does not automatically mean something is broken. Auxiliary heat is a second heat source—often electric resistance heat or a furnace in a dual-fuel system—that helps when the heat pump needs extra capacity. Its exact control depends on the system and thermostat.

When AUX may be expected

Auxiliary heat can come on during very cold weather, a defrost cycle, or after a large thermostat setback. Let the system run steadily and avoid making repeated large temperature changes. Check that the thermostat is in Heat, the filter is clean, and supply registers are open. If the home is comfortable and AUX appears briefly, note when it occurs rather than changing equipment settings.

When to schedule service

If AUX stays on in mild weather, the home cannot reach set temperature, or energy use rises sharply, ask a qualified technician to check airflow, thermostat setup, heat-pump operation, and backup heat. Electric heat strips and their wiring carry high current; do not open the air handler or test the circuits yourself. Use Emergency Heat only as directed by your system manual or technician; it disables the heat pump on many systems and may cost more to run.

See Carrier’s explanation of auxiliary heat and its heat-pump troubleshooting guide.

Watch: Heat Pump Heating Checks: Thermostat, Aux Heat, Pressures

Video: “Heat Pump Heating Checks: Thermostat, Aux Heat, Pressures,” by HVAC School, YouTube. Watch the original video. The demonstration is for technician education; follow equipment manuals and leave electrical or refrigerant work to qualified service personnel.

Image credit: Dan LeFebvre, original Unsplash page. Licensed under the Unsplash License.

ブログに戻る